Thermoplastic Materials - Polycarbonate-ISO (PC-ISO)

PC-ISO (polycarbonate-ISO), an industrial thermoplastic, in its raw state meets the ISO 10993-1 and USP Class VI classification1 and comes in a variety of colors. Because of their strength and medical compatibility, PC-ISO blends are commonly used in food and drug packaging and medical device manufacturing. PC-ISO gives you Real Parts™ that can be functionally utilized from conceptual prototyping through design verification through direct digital manufacturing.

Note: PC-ISO meets both ISO 10993-1 and USP Class VI standards in its raw state. Parts produced from the FDM (Fused Deposition Modeling) process must be re-certified before using in these types of applications. It is the responsibility of the finished device manufacturer to make a determination of the suitability of all the component parts and materials to be used in the finished products.

PC-ISO can be sterilized using either the gamma radiation or ethylene oxide (EtO) method.

Available Colors

Translucent (natural) and White.

Note: On-screen and printer color representations may vary from actual colors

Achievable Accuracy

Titan and 400mc systems: Parts are produced within an accuracy of +/- .005 inch or +/- .0015 inch per inch whichever is greater (+/- .127 mm or +/- .0015 mm per mm whichever is greater).*

900mc systems: Parts are produced within an accuracy of +/- .0035 inch or +/- .0015 inch per inch whichever is greater (+/- .089 mm or +/- .0015 mm per mm whichever is greater).*

*Note: Accuracy is geometry dependent. Achievable accuracy specification derived from statistical data at 95% dimensional yield.

Maximum Build Dimensions*

Titan and 400mc: 16 x 14 x 16 (inch), 406 x 355 x 406 (mm)

900mc: 36 x 24 x 36 (inch), 914 x 610 x 914 (mm)

*Larger parts can be built in pieces and bonded if necessary